Resi9 Arc fault detection RCBO 1P+N, 16A, 30mA, C Curve, 6000A, A type, All-in-one
Item Number: R9TDB3616
Specifications
Design
| Range | Resi9 |
|---|---|
| Product or component type | arc fault detection RCBO |
Physical
| Standards |
|
|---|---|
| [in] rated current | 16 A at 30 °C |
| [ue] rated operational voltage | 230 V AC 50 Hz conforming to AS/NZS 61009.1 |
| Control type | toggle |
| Local signalling | ON, OFF, fault trip |
| Mounting mode | clip-on |
| Mounting support | DIN rail |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles AC 50 Hz conforming to IEC 61009 |
| Connections - terminals |
|
| Wire stripping length | 14 mm for top or bottom connection |
| Height | 91 mm |
| Width | 36 mm |
| Depth | 75 mm |
| Net weight | 237 g |
| Ip degree of protection | IP20 |
| Relative humidity | 95 % at 55 °C |
| Ambient air temperature for operation | -25...70 °C |
| Ambient air temperature for storage | -40...85 °C |
| Mercury free | Yes |
| Rohs exemption information | Yes |
| Environmental disclosure | ENVPEP2210009EN |
| Reach regulation | Reference contains Substances of Very High Concern above the threshold |
| China rohs regulation | Product out of China RoHS scope |
| Eu rohs directive | Compliant By Exemption |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Documents & downloads
Filter items
-
All
-
How to video
-
CAD Files and Packs
-
Technical Data Catalogues
-
Environmental Disclosure
-
End of Life Manual
-
Installation Instruction
-
Certificates (MSDS)
-
Declaration of Conformity (Sustainability)
Frequently Asked Questions
Do I need separate Resi9 AFDD for each circuit?
Hide Show
As per AS/NZS 3000:2018, AFDDs shall be located at the switchboard from which the final sub-circuit being protected originates.
Therefore, we strongly recommend having a separate Resi9 AFDD for each final sub-circuit.
Therefore, we strongly recommend having a separate Resi9 AFDD for each final sub-circuit.
Can an AFDD replace a residual current device (RCD)?
Hide Show
Yes, Resi9 AFDDs come embedded with earth leakage current detection functionality. These help to provide combined protection against overcurrent, overvoltage, arc faults (serial arc fault, parallel arc fault and arc to earth) and earth leakage.
What is a Resi9 AFDD?
Hide Show
An AFDD detects the characteristics of dangerous arcing. Once it has been detected, it opens the electrical circuit to prevent a fire propagation. This is through an electronic system, that monitors electrical parameters in real time (current, voltage, frequencies etc).
Arc Fault Detection Devices help to reduce the risk of electrical fire.
An AFDD is a detection device that automatically cuts the electricity supply when it detects an arc fault in a circuit by immediately cutting off the electricity supply. AFDDs help to prevent arc faults from reaching temperatures where fires can break out.
Arc Fault Detection Devices help to reduce the risk of electrical fire.
An AFDD is a detection device that automatically cuts the electricity supply when it detects an arc fault in a circuit by immediately cutting off the electricity supply. AFDDs help to prevent arc faults from reaching temperatures where fires can break out.
Which application should I use Resi9 AFDDs in?
Hide Show
Schneider Electric recommends the use of AFDDs in final sub-circuits with high risk of fire. AFDDs are designed to protect both residential and commercial electrical installations.
We would highly recommend it for power (socket outlet) circuits due to potential:
• Arcing in extension boards.
• Damage to cables plugged into socket outlets behind furniture like bedsides or sofas.
• Damage to extension leads due to bending around corners or trapping under furniture.
• Damage to plugged cables due to temperature variation, ultraviolet rays, vibrations, humidity, and rodents in outdoor environment.
• You should also consider lighting and other circuits in following applications:
• Premises with children, handicapped or elderly people that might take longer to evacuate in case of fire.
• Premises constructed with combustible materials e.g. wooden buildings that might not allow enough time to evacuate.
• Premises with high risk of fire due to nature of processed or stored goods like home-based business storing large amounts of paper, wooden or other combustible materials
• Irreplaceable goods stored on premises
Please refer to standard AS/NZS 3000 for further information.
We would highly recommend it for power (socket outlet) circuits due to potential:
• Arcing in extension boards.
• Damage to cables plugged into socket outlets behind furniture like bedsides or sofas.
• Damage to extension leads due to bending around corners or trapping under furniture.
• Damage to plugged cables due to temperature variation, ultraviolet rays, vibrations, humidity, and rodents in outdoor environment.
• You should also consider lighting and other circuits in following applications:
• Premises with children, handicapped or elderly people that might take longer to evacuate in case of fire.
• Premises constructed with combustible materials e.g. wooden buildings that might not allow enough time to evacuate.
• Premises with high risk of fire due to nature of processed or stored goods like home-based business storing large amounts of paper, wooden or other combustible materials
• Irreplaceable goods stored on premises
Please refer to standard AS/NZS 3000 for further information.