Datasheet
Specifications
Design
| Range | SpaceLogic C-Bus |
|---|---|
| Product or component type | software |
| Device application |
|
| Product destination | C-Bus units |
| Market segment |
|
Physical
| Communication port protocol | C-Bus |
|---|---|
| Function available | commissioning |
| Provided equipment |
|
| Control type | by software |
| Connector type | USB |
| Range compatibility | C-Bus configuration software |
Material
| Device composition | software |
|---|
Documents & downloads
-
All
-
Quick Start Guide
-
Operating Manuals
-
Software - Release
Frequently Asked Questions
Which wizards are supported by Global Programming in C-Bus Commission?
Hide ShowAs of C-Bus Commission v2.15.0 the following wizards are supported in Global Programming:
- C-Bus Application 1, 2, 3 & 4
- C-Bus Dimmer Min/Max Levels
- Status Report
- Blocks and Widgets Timer Expiry Time/Duration
- Status Report
- C-Bus Clock
- Local Toggle Enable/Disable
- C-Bus Priority Enable/Disable
- Shutter Relay Fail Safe Duration
- Shutter Relay Operating Mode
- DLT Screen Options (FW v2.x)
- Indicator Options (Old Gen devices)
- Indicator Styles and Colours (Old Gen devices)
- Indicator Styles and Colours (New Gen devices)
- Dimmer Channel Power Recovery
- Relay Channel Power Recovery
- Synchronise Slave Fan Controllers
Aside from the new generation C-Bus Digital Dimmers, Voltage-Free Relays & eDLT firmware v 2.x, what other devices can be configured using C-Bus Commission?
Hide ShowAs of C-Bus Commission v2.15.0 the following wizards are supported in Global Programming C-Bus devices can be loaded into the Properties window and configured:
- 30/40 Series Modules: 5031NMML, 5041NMML
- PIR Sensors: 5753L, 5754ODPE, 5751L & 5750WPL
- Bus Couplers: 5104BCL & 5102BCLEDL
- Fan Controller: L5501RFCP
- Auxiliary Input Unit: L5504AUX
- Extra Low Voltage Relay: L5108ELVP
- Shutter Relay: L5501RBCP
Can I control a group on a live C-Bus Network in C-Bus Commission?
Hide ShowA group address on a live C-Bus Network can be turned on, off or flashed; however, you need to be using C-Bus Commission v2.15.0 or higher
A group's level/action selector can also be set in a similar manner:
Can I program another live network device whilst a live network device is being deployed in the deployment queue?
Hide ShowDoes C-Bus Commission support the same Find C-Bus Networks functionality that was available in C-Bus Toolkit?
Hide ShowYes, as of SpaceLogic C-Bus Commission v.2.15.0, a Find C-Bus Networks feature is available from the main page
What different scans can be performed on the DALI Line in C-Bus Commission?
Hide ShowAs of C-Bus Commission v2.15.0, the available scans for a DALI are:
1. DALI Scan
2. DALI Device Type Scan
3. Read DALI Gateway
4. Discover Faults
Note: A Scan can also be done by pressing the INSTALL button of each line on the front of the unit