Browse all
Browse all

C-Bus Dimmer DIN Rail Mounted Leading Edge, 240V AC, 8 Channel, 1A, Without C-Bus Power Supply

C-Bus Dimmer DIN Rail Mounted Leading Edge, 240V AC, 8 Channel, 1A, Without C-Bus Power Supply

Item Number: L5508D1AP

Datasheet

Product Dimensions

Width icon

Width215 mm

Height icon

Height85 mm

Depth icon

Depth65 mm

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range C-Bus
Product brand Clipsal
Product or component type dimmer
Device application control

Physical

Device presentation basic element
Load type
  • incandescent
  • low voltage lamp with electronic transformer
Dimmer type leading edge
Communication network type C-Bus
Local signalling LED
Number of channels 8
Connector type
  • RJ45 for C-Bus
  • RJ45 for remote override
Mounting support DIN rail
Clamping connection capacity
  • 1 x 2.5 mm²
  • 2 x 1.5 mm²
Width 215 mm
Height 85 mm
Depth 65 mm
Net weight 675 g
Ambient air temperature for operation 0...45 °C
Relative humidity 10...95 %
Toxic heavy metal free Yes
Mercury free Yes
Rohs exemption information Yes
Environmental disclosure ENVPEP2408008EN
Reach regulation Reference contains Substances of Very High Concern above the threshold
China rohs regulation Product out of China RoHS scope
Eu rohs directive Compliant

Others

Package 1 bare product quantity 1
Average percentage of recycled plastic content 0 %
Legacy weee scope In
Weee label The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Weee applicability Finished product
At least in Europe
Warranty duration(in months) bmecat 18
Load current 1 A per channel
Standby consumption 10 W
Network frequency
  • 47...53 Hz
  • 57...63 Hz
Maximum number of supported devices 100 per network
Input impedance 100 kOhm at 1-1 kHz
Isolation voltage 3.75 kV from C-Bus to mains
Starting time 5 s
Time delay range 0...33.5 min
Software function
  • select network clock
  • select network burden
  • select time delay range
Number of modules 12
Unit type of package 1 PCE
Number of units in package 1 1
Package 1 height 10.0 cm
Package 1 width 10.8 cm
Package 1 length 23.0 cm
Package 1 weight 936.0 g
Total lifecycle carbon footprint 4 kg CO2 eq.
Carbon footprint of the manufacturing phase [a1 to a3] 2.88457
Carbon footprint of the manufacturing phase [a1 to a3] 3 kg CO2 eq.
Carbon footprint of the distribution phase [a4] 0.1207648
Carbon footprint of the distribution phase [a4] 0.1 kg CO2 eq.
Carbon footprint of the installation phase [a5] 0.01167309
Carbon footprint of the installation phase [a5] 0 kg CO2 eq.
Carbon footprint of the use phase [b2, b3, b4, b6] 1.2829266997
Carbon footprint of the use phase [b2, b3, b4, b6] 1 kg CO2 eq.
Sustainable packaging No
Carbon footprint of the end-of-life phase [c1 to c4] 0.189514
Carbon footprint of the end-of-life phase [c1 to c4] 0.2 kg CO2 eq.
Pvc free No
Halogen-free status Halogen free product
Silicone-free  No
Take-back No
Product contributes to saved and avoided emissions No
Removable battery N/A
Total lifecycle carbon footprint 4.4894485897
Average percentage of recycled metal content 0 %
Packaging made with recycled cardboard Yes
Packaging without single use plastic No
China rohs label 1
Halogen-free status Halogen free product
Pvc free No
Silicone-free No
End of life manual availability ENVEOLI2408008EN
Take-back No
Weee label The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Warranty (in months) 18

Documents & downloads

Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Environmental Disclosure

  • End of Life Manual

  • Installation Instruction

  • Operating Manuals

  • Specification Guide

  • Application Notes

  • Certificates (MSDS)

  • Declaration of Conformity

  • Declaration of Conformity (Sustainability)

  • Software - Release

Important: Some software files may need a mySchneider or Club login to download.

Frequently Asked Questions

Why does the Unit Indicator on C-Bus output units i.e L5512RVF/L5508D1A flashing?

Hide Show

This indicator shows the status of the individual unit. A continuous green light (OK) indicates the mains power is connected. If the indicator is flashing it means that any one of the four channels has been toggled (using the override facility) into a state different to the C-Bus network.

If any of the output channels have been toggled (using override facilities) into a state other than is present on the C-Bus network, this indicator will flash with a 90% on duty cycle.

1


 

What type of LED's can be used on C-Bus Dimmers?

Hide Show

Firstly you will need to confirm whether your C-Bus system contains C-Bus Leading Edge Dimmers or C-Bus Universal Dimmers, You may need to consult with your EcoXpert in Light and Room Control which one(s) you have if unsure. 

The general recommendations for LED compatibility with C-Bus Dimmers is as follows
1) Ensure your LED's have a dedicated LED Driver (electronic transformer) that supports your C-Bus Dimmer type
2) Bench test that the LED Driver is of good quality and works as expected at your site
3) C-Bus Dimmer channels require >25W of load if less is connected to a specific channel that channel will require the addition of a 31LCDA (Load Corrective Device)

C-Bus

4) If the dimming range of the LED fittings is specified by the manufacturer - the installer can programmer the Min/Max settings of the C-Bus Dimming channel to match the LED fittings dimming range.

Note:
C-Bus Leading Edge Dimmers will require LED's which have electronic transformers (LED Driver) which support Leading Edge AC phase control dimming (as noted in the compatible loads section of the installation manual)

C-Bus


C-Bus Universal Dimmers will require LED's which have electronic transformers (LED Driver) which supports Trailing Edge AC phase control dimming (as noted in the compatible loads section of the installation manual).
Although Universal Dimmers can support leading OR trailing edge AC phase control dimming it needs to be exclusively one or the other (NOT BOTH). As such LED Drivers which note LE/TE LED Driver are NOT suitable for the Universal Dimmer. 

C-Bus
IMPORTANT: Clipsal by Schneider Electric & Schneider Electric DO NOT make LED's which are compatible with C-Bus NOR can we recommend specific LED Drivers for your C-Bus Dimmer type as LED Dimming and Driver technology is continually changing. The above is a guideline to assist you choose a compatible LED with dedicated LED Driver that supports your dimmer in question. As noted above please have your EcoXpert in Light and Room Control bench test LED Fittings and LED Driver for suitability on your C-Bus Network.