C-Bus Home Controller SpaceLogic IP, Free Standing, 24V DC

C-Bus Home Controller SpaceLogic IP, Free Standing, 24V DC

Item Number: 5200WHC2

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

SpaceLogic C-Bus

Product or component type

system controller

Product compatibility

IP device

Physical

Supply

DC extension cable

Communication network type

  • C-Bus
  • E-LAN

Connector type

  • USB
  • HDMI
  • RJ45
  • bus

Type of cable

CAT5 category 5e RJ45

Mounting mode

free standing

Length

219 mm

Width

175 mm

Height

33.5 mm

Ambient air temperature for operation

0...45 °C

Relative humidity

10...90 % without condensation

Mercury free

Yes

Rohs exemption information

Yes

Environmental disclosure

ENVPEP2201001_V1

Eu rohs directive

Compliant with Exemptions

Reach regulation

Reference contains Substances of Very High Concern above the threshold

Reach regulation

Reference contains Substances of Very High Concern above the threshold

China rohs regulation

Product out of China RoHS scope

Eu rohs directive

Compliant By Exemption

China rohs regulation

Product out of China RoHS scope. Substance declaration for your information

Others

Average percentage of recycled plastic content

0 %

Package 1 bare product quantity

1

Legacy weee scope

In

Warranty duration(in months) bmecat

18

Weee label

N/A

Weee applicability

Finished product

Outside of Europe

Device short name

WHC2

Ethernet service

  • dynamic DNS
  • DHCP client

Clock drift

  • 1 min/month
  • 1 s/1000 years NTP

[us] rated supply voltage

  • input: 24 V DC, <1 A
  • communication bus: 15...36 V DC, <0.036 A

Mounting location

indoor use only

Unit type of package 1

PCE

Number of units in package 1

1

Package 1 height

7.8 cm

Package 1 width

27.2 cm

Package 1 length

29.6 cm

Package 1 weight

1.186 kg

Total lifecycle carbon footprint

747 kg CO2 eq.

Carbon footprint of the manufacturing phase [a1 to a3]

15.37649

Carbon footprint of the manufacturing phase [a1 to a3]

15 kg CO2 eq.

Carbon footprint of the distribution phase [a4]

0.15302365

Carbon footprint of the distribution phase [a4]

0.2 kg CO2 eq.

Carbon footprint of the installation phase [a5]

0.01676411

Carbon footprint of the installation phase [a5]

0 kg CO2 eq.

Carbon footprint of the use phase [b2, b3, b4, b6]

739.4200000000001

Carbon footprint of the use phase [b2, b3, b4, b6]

739 kg CO2 eq.

Sustainable packaging

No

Carbon footprint of the end-of-life phase [c1 to c4]

0.6186274833333333

Carbon footprint of the end-of-life phase [c1 to c4]

0.6 kg CO2 eq.

Pvc free

No

Halogen-free status

Halogen free product

Silicone-free 

No

Take-back

No

Product contributes to saved and avoided emissions

No

Removable battery

N/A

Total lifecycle carbon footprint

746.9583385766667

Average percentage of recycled metal content

0 %

Packaging made with recycled cardboard

Yes

Packaging without single use plastic

No

Halogen-free status

Halogen free product

Pvc free

No

Silicone-free

No

End of life manual availability

ENVEOLI2201001_V1

Take-back

No

Warranty (in months)

18
Show all specifications

Documents & downloads

Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Environmental Disclosure

  • End of Life Manual

  • Operating Manuals

  • Specification Guide

  • Application Notes

  • Declaration of Conformity

  • Declaration of Conformity (Sustainability)

  • Software - Release

  • Firmware

Important: Some software files may need a mySchneider or Club login to download.

Frequently Asked Questions

How to change the order of the Schedule in PICED so it sits in the correct order that you want on the wiser2 apps

Hide Show

Wiser2 apps Widget/Schedule not in order.

To change the order of the widget display in wiser2 apps.

PICED> In widget manager

  1. Aligning them from low to high by clicking the number column
  2. Highlight the widget  then drag and drop the widget in the order that you please

collum

 

The order can also be change for scheduler

  1.  Aligning the Schedules from low to high by clicking the number column
  2. Highlight the schedule widget  then drag and drop the widget in the order that you please

collums


 

Wiser2/SLHC Remote Connection for PICED 1.14.2 onward

Hide Show

In the new Firmware Wiser 2 will only be able to connect remotely using SSL/HTTPS (Port 443 or the External Port that is defined in PICED)  

This means HTTP or Port 80 will now longer allow you to login remotely

Whenever you change the remote connection setting, it will force a reboot of the Wiser 2

              Wiser 2 with WiFi – wiser2firmware_1_33_1.img, Wiser 2 without WiFi – SLHomeControllerFirmware_2_01_1.img

5200WHC2 Wiser 2 Security Enhancements PICED 1.14.2 onward

Hide Show

New Password Rules for Wiser 2
 

  • Passwords must be at least 8 characters and not more than 64 characters in length.
  • Passwords must contain 1 upper case and 1 lower case.
  • Passwords must contain 1 number or 1 special character.
  • Passwords must not contain spaces at the beginning or end.
  • Passwords must not contain usernames in them.
  • Passwords must not be the same as existing passwords.
    • Added one more point for mobile and web clients (not applicable for PICED).

SSL Certificates (TLS)

  1. Uploading Signed Certificate (purchased from DigiCert, GeoTrust, RapidSSL, ZeroSSL)
  2. Let's Encrypt (Must have a DNS for their domain)
  3. Self-Sign Certificate

Wiser2 and C-Bus Home Controller (SLHC) both have same part number (5200whc2) but hold a different firmware

Hide Show

Both wiser have the same part number(5200WHC2) but different Device type

SE.com link to the latest PICED 4.15.2
https://www.se.com/au/en/product-range/2216-spacelogic-cbus-home-automation-system/#software-and-firmware

Old Wiser2 
Wiser 2 with WiFi – wiser2firmware_1_33_1.img

Current C-Bus Home Controller (SLHC)
Wiser 2 without WiFi – SLHomeControllerfirmware_2_01_1.img

Firmware update is done via PICED but Alternatively, you can use the option Wiser Manual Update under the Settings from the Web Client and then choose one of the above files for the upgrade.

manual F/W update
manual F/W update link

 

What Class is Wiser2/SLHC (5200WHC22) Network Support?

Hide Show

Unfortunately, to be able to disable the remote connection for Projector Control Wiser 2 only supports class C network.

A class C network would have a subnet mask of 255.255. 255.0, which means that 24 bits are used for the network. In CIDR notation, this is designated by a /24 following the IP address


 

Wiser2 apps Security Update notice

Hide Show
A security update notice will come up like the image below. This is a Wiser2 apps Security Update notice.

1 apps show up with notification

 

 

 

Dear SpaceLogic C-Bus Community,

We want to notify you about a critical security update for the Wiser 2 app. This update will affect users as the app will no longer support the unsecured Remote Connection feature, which allows connection to the mobile app from outside the home.

Users of the Wiser 2 app will receive a push notification about this update in early January 2024, and the new app with the security update will be available for download in February 2024.

This update impacts Wiser 1, Wiser 1.5, Wiser MK II, and SpaceLogic C-Bus Home Controller users, with actions varying depending on the controller installed in the system.

The push notification that will be sent to Wiser 2 app users in early January, will guide them to a non-indexable web page for details based on the controller they have in their installations. Please refer to the following link for more information:

https://www.clipsal.com/wiser-customer-support/wiser-c-bus-security-update

We kindly request that you disseminate this information to your customer support teams.

Thank you,

Show More