Clipsal - Mechanisms, Switch Mechanism, 250V, 10A, 1 way/2 way

30 Series, Switch Mechanism, 250V, 10A, 1 Way/2 Way WE

Item Number: 30M-WE

Switch mechanism. One-way or two-way switching is available. 30 Series mechanism. Suitable for Clipsal C2000. Colour: White Electric Rated current: 10AX. Operating voltage 250V a.c. 50Hz Note: Requires installation by an appropriately licenced electrician.

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Series 30|Standard Series

Product brand

Clipsal

Surface finish

glossy

Sustainable offer status

Green Premium product

Physical

Device presentation

basic element

Number of poles

1

Device mounting

flush

Number of rocker

1

Local signalling

without

[ue] rated operational voltage

250 V AC

Rated current

10 A

Load type

fluorescent lamp 10 A|LEDi lamp 100 W

Marking

without marking

Actuator

rocker

Switch function

1-pole

Reach regulation

Reference contains Substances of Very High Concern above the threshold

Eu rohs directive

Compliant with Exemptions

Mercury free

Yes

Rohs exemption information

Yes

China rohs regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental disclosure

ENVPEP120506EN

Circularity profile

N/A

Material

Material

PVC (polyvinyl chloride)

Others

Package 1 bare product quantity

1

Unit type of package 1

PCE

Number of units in package 1

1

Package 1 height

2.36 cm

Package 1 width

2.36 cm

Package 1 length

2.9 cm

Package 1 weight

14 g
Show all specifications

Frequently Asked Questions

hide show

How can you change the maximum speed on the ATV31 or ATV312 drives so that the motor can operate above 60Hz?

Issue:   
How can the motor operate above 60Hz in the ATV31 or ATV312 drives?
 
Product Line:   
ATV31 ATV312
 
Environment:  
All
 
Cause:  
Changing high speed / max frequency
 
Resolution:   
Parameter HSP determines the maximum speed the drive can operate.  Parameter tFr determines the maximum value that HSP can be adjusted.  

By default, tFr is set to 60Hz.  When changing the Motor Frequency - bFr this changes tFr to 72Hz.  

To increase the maximum speed above 72Hz - Go to the drc menu and Set parameter tFr.  This can be adjusted up to 500Hz.  After saving the change, go to the SEt menu > HSP and adjust up to the desired speed.  

If your motor is a specialty motor that is rated for a frequency other than 50Hz. or 60Hz. such as a 300Hz. rated spindle motor, change parameter FrS under the DRC menu to match the rated frequency of the motor.

 

Do the electronic boards of the Altivar 61 and Altivar 71 drives have conformal coating?

Issue:
Do Altivar 61 and Altivar 71 electronic boards have conformal coating?

Product Line:
Altivar ATV61 and ATV71

Environment:
NA

Cause:
Needs to know if you can order the ATV61 ATV71 drive with conformal coating?

Resolution:
The Conformal Coating is standard on:
 
Part NumberDescription 
ATV61HC40N4ATV61 400KW 600HP 480V 3PH EMC
ATV61HC50N4ATV61 500KW 700HP 500V 3PH EMC
ATV61HC63N4ATV61 630KW 900HP 480V 3PH EMC
ATV71HC31N4ATV71 480V 315KW 500HP EMC
ATV71HC40N4ATV71 480V 400KW 600HP EMC
ATV71HC50N4DATV71 480V 500KW 700HP EMC w/o choke
ATV71HC50N4ATV71 480V 500KW 700HP EMC

These products are treated for increased protection for dusty and corrosive environments. With this coating, exposed copper is tinned, circuit boards are conformal coated in critical areas and plastics are treated to better withstand the corrosive nature of certain oils.

The ATV61 and ATV71 drives are designed for maximum ambient pollution as follows:
ATV71:
H...M3, 71HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
HD18M3X to HD75M3X, HD22N4 to HC50N4 are Degree 3 conforming to IEC/EN 61800-5-1

ATV61:
H...M3, HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
HD18M3X to HD90M3X, HD22N4 to HC63N4 are Degree 3 conforming to IEC/EN 61800-5-1

What is a good source of information for the ATV12?

Issue:
Looking for ATV12 information

Product Line:
Altivar 12

Environment:
All models and serial numbers

Cause:
Information is needed for installation and programming.

Resolution:
User manual is document number BBV28581.  This manual includes instructions for installing the drive, connecting the control wiring, programming and troubleshooting.
https://www.schneider-electric.us/en/download/document/BBV28581/

What is the din rail mounting kit part number for the ATV312?

Issue:
Part number for ATV312 Din rail mounting kit

Product Line:
ATV312

Environment:
All

Cause:
Desire to utilize din mounting kit option

Resolution:
The part numbers need to order the mounting kit for this drive are VW3A9804 and VW3A9805.

VW3A9804 covers the following range of drives: ATV312....
018M2, H037M2, H055M2, H075M2, H018M3, H037M3, H055M3, H075M3

VW3A9805 covers the following range of drives: ATV312....
HU11M2, HU15M2, HU11M3, HU15M3, HU22M3, H037N4, H055N4, H075N4, HU11N4, HU15N4, H075S6, HU15S6
Note: The din rail mounting kits are only available for the above drives. 

Note: Other drives not list above do not have a din rail kit.

What is the part number for the standard 30M rocker mech with the red indicator mark on the top ?

30MRD-WE (White)

Is there an offer for Nema 4X rated drives?

Issue:
Wondering if the ATV61 or ATV71 drives are available in type 4 or 4X enclosures

Product Line:
Altivar ATV61 and ATV71 open type drives

Environment:
All

Cause:
Needs to get the ATV61 and ATV71 drive in a NEMA 4 or 4X stand alone enclosure.

Resolution:
There is not a standard offering for type 4 or 4X enclosures for our drives.
It may be possible to install the drive in a properly selected enclosure by a local panel builder or contractor.
Or, contact a local SquareD field office for assistance. They may be able to offer assistance with other options.
Show More