Standard Series Socket Outlet Mechanism Auto Switched, 10A, Single Pole | White Electric

No, the configuration of timer or time clock functionality needs to be done via Bluetooth using the Wiser by SE app on a mobile device.

No, The Wiser 2AX switches are only able to be used as a one way switch. 

Multi way switching with the Wiser push button switches is able to be done with the 10AX Switches (PDL356PB10MBTW-VW or PDL356PB10MBTZ-VW) and the addition of PDL356PBSSL-VW control link mechanisms.

No, the PDL356PB2MBTW-VW is able to be configured via Bluetooth to act as a switch, a timer, or a Run on timer. Time Scheduled switching is not able to be achieved by the switch on it's own. 

With the addition of a PDL501902 Wiser hub and connecting the Switch via Zigbee, scheduled switching is able to be achieved via automations within the Wiser by SE app.

Alternatively, the PDL356PB10MBTW-VW switch is able to do time scheduled switching as standard when configured via Bluetooth.

Wiser Micro Module Switch - CLP5011WSZ/PDL5011WSZ - 0.4 W
Wiser Micro Module Dimmer - CLP5010WDZ/PDL5010WDZ - 0.4 W
Wiser Micro Module Blind - CLP5015WBZ/PDL5015WBZ - 0.4 W
Wiser Hub - CLP501902/PDL501902 - 0.2 W 
Bluetooth 2AX - 41E2PBSWM-VW/PDL356PB2MBTW-VW - 0.25 W
Bluetooth 10AX - 41E10PBSWM-VW/PDL356PB10MBTW-VW - 0.20 W
Bluetooth Dimmer - 41EPBDWCLM-VW/PDL354PBDMBTW-VW - 0.50 W
Bluetooth Socket - 3025CSG/PDL395CSG - 0.30 W
ZigBee 2AX - 41E2PBSWMZ-VW/PDL356PB2MBTZ-VW - 0.25 W
ZigBee 10AX - 41E10PBSWMZ-VW/PDL356PB10MBTZ-VW - 0.20 W
ZigBee Dimmer - 41EPBDWCLMZ-VW/PDL354PBDMBTZ-VW - 0.50 W
ZigBee Socket - 3025CSGZ/PDL395CSGZ - 0.30 W

Issue:

When trying to connect using Controller Assistant or Machine Expert logic builder , TM262 is giving "the Device is not ready for encrypted communication" .

 

Product Line:

M262 Product Line.

Machine Expert Logic Builder .

 

Please try the below Workarounds to see whether you can connect to Modicon TM262 PLC ,

(1). As per Machine Expert V2.3 Release notes there has been Bug Reported and the workaround is , Deselect the option Encrypted Communication in communication Settings under Device Tree Tab in Controller  Selection mode of the Ecostruxure Machine Expert Logic Builder

 

(2). If the issue still persists after De-selecting the Encrypted Communication (as per workaround (1)) then please follow the below notes ,

As per Machine Expert V2.3 Release Notes there has been a Bug reported , Login with encrypted  communication to the Modicon M262 controller is not possible after updating the firmware to V2.2.2. Due to a change in certificate handling in EcoStruxure Machine Expert V2.2.2, encrypted communication does not work when you reuse the previous version of the certificate after upgrade to V2.2.2.

Workaround: Delete the existing certificate by using the Security Screen editor or perform an SD card upgrade    to V2.2.2. 

This can be done with our 2AX, 10AX or Micro Module Switch along with the Hub. At one end you will need an Active, Neutral and Load wiring. At the other end you will need Active and Neutral only. You can then create Automations to achieve the 2-way.
You need to create two automations for a 2-way:
 

1. when switch A and switch B are ON, turn switch A and switch B ON
2. when switch A and switch B are OFF, turn switch A and switch B OFF

This can be expanded to 3-way, 4-way etc by simply adding the other switches into the respective ON and OFF automations.