Frequently asked questions
What will cause a CLr fault on the ATV212?
FA280305
28 July 2022
Issue:Getting a CLr fault on the ATV212.
Product Line:
ALTIVAR 212
Environment:
All models
Cause:
Troubleshooting
Resolution:
CLr [Reset active] is a status which is displayed after the STOP/RESET key is pressed while a detected fault is displayed. It indicates that the cause of the detected fault has cleared and the fault status can be reset. Press the STOP/RESET key again to clear the detected fault. This type of fault reset only applies when in Local mode or in Remote mode with CMOd=1 ( HMI ). It also only applies to the following faults: