KIT SWITCH AND CONDUIT HWS 250 V 20 A

That cable is 1.8m long.

The cable length is 1800mm

Unfortunately, we only make a 2 gang version.

The part code is 2000-WE surround cover plate

No. Unfortunately the part number is only available as 2 gang.

No. Unfortunately, the part number is only available as 2 gang.

The Saturn Zen range Z4025HS or Z4032HS

Product Line:
Circuit Breakers

Environment:
Electrical Distribution Equipment

Resolution:
The trip unit connector is cat. no. S33100. It includes terminal identification markings.

Issue:
Do the 9001KY, 9001KYSS, 9001KYAF, and 9001SKY enclosures have a UL File number?
Product Line:
30mm Enclosures                           
Environment:
9001KY/SKY Control Stations
Cause:
To clarify the certification for an application.
Resolution:
The enclosures are not electrical. They will have enclosure ratings, but no UL testing is done on the enclosures. It will be UL when installed with UL components. See page 17-55 Digest 173.
 

Product Line:
Circuit Breakers

Environment:
Electrical Distribution Equipment.

Resolution:
For all 1200A sensors and greater they are 500A, 640A, 720A, 800A, 880A, 960A, 1040, 1120A, and 1200A respectively.

Issue:
What is the current rating for the ZB2BE101 and ZB2BE102 contact blocks?

Product Line:
Harmony Push Buttons

Environment:
Harmony 22mm

Cause:
Product Specifications

Resolution:
They have a NEMA A600 rating of 10A continuous.

Issue:
Product Features

Product Line:
Unitized EZ Metering Equipment

Resolution:
The Unitized EZ Stack devices were self-contained meter centers, available with up to six disconnecting means. The 100 ampere devices accepted field installed Type QO or Q1 tenant breakers. The 125 ampere and 150 ampere devices were supplied with factory installed Type Q2 tenant breakers. This product line is obsolete. The current offering for this application would be MP METER-PAK.


 

Issue:
What are the part numbers needed for remote mounting the ATV61/71 VW3A1101 keypad?

Product Line:
VW3A1101 keypad for ATV61 ATV71 drives

Environment:
All

Cause:
Needs to get the part number for the remote bezel, cable and door for the ATV61 and ATv71 keypad display.

Resolution:

The mounting kit, including bezel and hardware is VW3A1102

The Modbus cables to connect the keypad to the control basket of the drive are: 3 Meters -    VW3A1104R30
5 Meters -    VW3A1104R50
10 Meters -  VW3A1104R100


The clear plastic door (IP 65 rating) to cover the keypad when not in use is VW3A1103








 

No, unfortunately 2000 series products are not IP66 Rated.
However, we do offer a very limited range in the C2000 and 2000 series that are IP66 rated.
The items are as follows:

Cat No.	Description
2031V66	Single switch for vertical mounting - 2000 Series
2031H66	Single switch for horizontal mounting - 2000 Series
2032V66	Twin switch for vertical mounting - 2000 Series
2032H66	Twin switch for horizontal mounting - 2000 Series
C2031V66	Single switch for vertical mounting - C2000 Classic
C2031H66	Single switch for horizontal mounting - C2000 Classic
C2032V66	Twin switch for vertical mounting - C2000 Classic
C2032H66	Twin switch for horizontal mounting - C2000 Classic
C2031V66IC	Identifi cation kit + cover for C2031V66 - C2000 Classic
C2031H66IC	Identifi cation kit + cover for C2031H66 - C2000 Classic
C2032V66IC	Identifi cation kit + cover for C2032V66 - C2000 Classic
C2032H66IC	Identifi cation kit + cover for C2032H66 - C2000 Classic

Some of there key features are:

• 1 or 2 gang weatherproof switch
• 84 mm apart Mounting centres
• Switches have been re-designed to provide mechanisms that can be re-orientated horizontally or vertically

See attached document for the catalogue on these products.

For furter information please visit https://www.clipsal.com/Trade

 

Issue:
Can the analog output of the ATV61 or ATV71 be set up as 0-10 VDC instead of 4-20 mA?

Product Line:
ATV61 and ATV71

Environment:
All

Cause:
NA

Resolution:
Yes.
Go to the Input/Output menu (1.5) and set AO1 type to voltage (0-10v range). Set AO1 assignment to the proper setting. The minimum and maxim range can also be adjusted inside the 0-10 V or 4-20  mA ranges.


 

Product Line:
Circuit Breakers

Environment:
Applies to PowerPact M, P and R

Resolution:
For Powerpact M, P and R breakers, the Kirk Key Interlock provision is NOT available for field installation. The provision is only available factory installed on the breaker cover. For an existing breaker, instead of having to replace the breaker, customer can return the breaker/cover via return tags to the plant to have the lock ``provision`` (mounting bracket) installed, based on the below. Then you can buy a Kirk lock from the vendor direct to install on the breaker.

NOTE:  Return options are below based on type of breaker you have.
 
PowerPact M:
Unit Mount           =              Return of Cover Only is acceptable
I Line                  =              Return of Cover Only is acceptable
 
PowerPact P:
Unit Mount           =              Return Complete Breaker with cover
I Line                  =              Return of Cover Only is acceptable
 
PowerPact R:
Unit Mount           =              Return of Cover Only is acceptable
I Line                  =              Return of Cover Only is acceptable

For cases where the breaker is in service and the cover cannot be removed, they can take clear pictures showing the serial number, catalog number, and date code, and follow the process in the same way to get a new cover with provision sent to them. Once they remove the original cover and place the new cover on the breaker, they will still need to ship the original cover back to the plant.
 
If the existing breaker has a padlock attachment, it will have to be removed. The key lock and padlock take up the same position on the breaker cover.

When returning the Breaker/Cover ask for ``suffix JA (for M or P frame) or  JK (for M, P or R frame)`` for kirk provision. The return TAGs will be for a ``code 50 return and repair``.
Suffix for ``JR`` for Schneider (Federal Pioneer) provision is no longer available, since about Sept. 2013.

The lock part numbers are as follows:
Kirk Single Lock (horizontal mount) KFL003710 ADD 3 INCH ROLL PIN (Square D Drawing # 48186-220-50) For Powerpact M, P & R Breakers Only
No longer available - Federal Pioneer Single Lock (horizontal mount) VFR-3/8-E (Square D Drawing # 48186-221-50) For Powerpact M, P & R Breakers Only - No longer available.