Passive Infrared Sensors Indoor 360°, 250V, 10A, 3 Wire, Flush

White Electric | Passive Infrared Sensors Indoor 360°, 250V, 10A, 3 Wire, Flush

Passive Infrared Sensors Indoor 360°, 250V, 10A, 3 Wire, Flush

Item Number: 753R-WE

Datasheet

Specifications

Design

Range

Infrascan

Product brand

Clipsal

Product or component type

movement sensor

Device application

lighting

Surface finish

brilliant

Sustainable offer status

Green Premium product

Physical

Sensor type

PIR

[Ue] rated operational voltage

200...265 V AC

Inrush current

10 A

Protection type

creep zone protection

Function available

automatic with manual override

Movement detection area

14 m

Device mounting

flush

Mounting support

ceiling

Mounting height

2.4 m

IP degree of protection

IP20

Ambient air temperature for operation

0-50 °C

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Compliant

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Environmental Disclosure

ENVPEP110502EN

Circularity Profile

ENVEOLI110502EN

Material

Material

plastic

Others

Product specific application

staircase monitoring

Network frequency

50 Hz

Power range

<= 230 W

Horizontal detection angle

0-360 °

Time delay range

0...5 s (switch-on)

Duty cycle

20 min

Detection face

  • lateral: 7 m
  • frontal: 7 m
    • Package 1 Weight

      204 g

      Package 1 Height

      165 mm

      Package 1 width

      85 mm

      Package 1 Length

      125 mm
      Show all specifications

      Documents & downloads

      hide show
      Filter items
      • All

      • End of Life Manual

      • Installation Instruction

      • Product Environmental

      • Specifications

      Frequently Asked Questions

      hide show

      What is the minimum load on a 753 sensor?

      The Standard 753 2 wire sensor has a 40W minimum load.
      The 753R 3 wire sensor has no minimum load.

      What is the IP Rating for the motion sensor 753R?

      The IP Rating for the sensor 753R is IP20.
      Some of its key features are:
      • 10A maximum load current
      • Stand-by power consumption is less than 1W
      • 3 Wire
      • Neutral required
      • 30 seconds warmup time
      • 360°, circular detection field 14m diameter rated detection field at maximum sensitivity
      • 5 seconds to 20 minutes timer delay range
      • Cables accommodates 4 terminals, up to 2 x 2.5mm² cable per terminal
      • Length of sensor 141.5mm
      • 72mm Diameter
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=753R
       

       

      Can more than one 751R , be used to control the same load?

      Yes , the 3 wire 751R can have more than one unit controlling the same load...
      For further information , visit link below:-
      https://www.clipsal.com/Trade/search-results?q=751R

       

      Where should the Load correction devices 31CAP and S31LCDA be used?

      The 31CAP is to be use with the following two wire products
      Infrascan 750WP, 751, 753.
      Timer 31VETR
      Sunset Switch WS226SSR/2, 56SSR/2, 31VSSR/2

      The S31LCDA is suitable for use with Clipsal & Schneider Electric 2-Wire, mains powered Dimmers that use
      Leading Edge, Trailing Edge and Universal Dimming.
      Other Suitable loads: Dimmable CFL/ Dimmable LED with Electronic control

      (Load correction Devices may not correct all problems)
      Installation Instructions can be found on the Clipsal.com Website.
       

      Is there a recessed wall mount sensor?

       There are a few options of PIR sensors that can be flush mounted in a wall, such as 753, or any of the ceiling mount sensors, depending on what range and angle you want to sense, but the best option for a stand alone sensor would be the Iconic 41EPIRM module mounted in an Iconic plate.
      There is also an Iconic nightlight (3025NW) that fits on an Iconic 3025G double horizontal socket that has a PIR sensor and daylight switch that asctivates an inbuilt LED. (This does not have an independant output to switch any other load.)

      Can 753 series motion sensors be connected in parallel to a common load?

      If parallel connection of multiple motion sensors to control a common load is required, use Cat. No. 753R (3 wire infrascan). Please note more than one 753 (2 wire infrascan) CANNOT be connected in parallel to a common load.
      For further information please read the attached installation instruction .