C-Bus SpaceLogic Software Configuration tool

Open C-Bus Toolkit > Help> Check for New Version. 

Then click on Australia > Software and Firmware

 

Quick DALI scan: Quick DALI scan is the default scan which scans the DALI devices, device types and assigned short addresses. Performing a Quick DALI scan will:

• Address all unaddressed devices
• Discover all devices connected to the DALI gateway
• Discover all missing, duplicate and broken devices

Extended DALI Scan will scan the attributes/properties of all the DALI devices on the DALI line, performing an Extended DALI Scan will:

• Do Quick Scan
• Get DALI Group, DALI Scene, DALI device levels properties (Min, Max, Recovery & Fail)

During your process of scanning and commissioning your DALI line, there may be scenarios where you need to:

• View the properties of a Line Device
• Extract (transfer) information from Network Devices to your Devices in Project section

To do this you will need to perform a Full Gateway Scan, which retrieves the information stored in the C-Bus DALI-2 Gateway live on the network, including the C-Bus DALI-2 Gateway programming and the programming of all DALI Devices (according to the C-Bus DALI-2 Gateway).

The main objective of a Full Gateway Scan is to rebuild a project from a live/existing C-Bus DALI-2 Gateway on the network which is already programmed/configured (and operational) where a C-Bus DALI-2 Gateway does not exist in the project. This scan shall extract all the information within the C-Bus DALI-2 Gateway and include all the information presently known about the DALI devices on the lines of the Gateway. The Full Gateway Scan does not perform any new device discovery, nor does it discover or resolve faults, and does not readdress any unaddressed DALI devices.

If you experience C-Bus software Unexpected error please email to 

cis.errors@clipsal.com.au

HomeGate V4.15.0 or later is compatible with C-Gate 3

 

Release note:

Download link:

https://www.se.com/au/en/product-range/2216-spacelogic-cbus-home-automation-system/#software-and-firmware

 

https://download.schneider-electric.com/files?p_Doc_Ref=HomeGate_V4.15.1&p_enDocType=Software+-+Release&p_Archive_Name=HomeGate_V4.15.1.zip

 

C-Bus Technical Support

Phone 137328 - Option2 for technical ask to be put through to C-Bus Support

 

Or  Email     partner.supportau@schneider-electric.com        

 

You will get a auto respond with a case number to follow up

 

C-BUS operating hours for Australia are:

7 AM - 6.30 PM,  Monday-Friday, GMT +9.30 ( Adelaide, AUST )

 

Does C-gate3 run on window 32 or 64 bit?

C-Gate 3 and C-Bus Commission are both 64bit applications which require a 64bit Operating System on a 64 bit Processor to run.