plug cond pvc screwed 40mm

PLUG COND PVC SCREWED 40MM

Catalogue Number: 220S40
plug cond pvc screwed 40mm
Colour: Grey
Colour: Per UOM Std.
  • Grey 1 PCE 1

Specifications

hide show
Product brand
Clipsal
Range of product
Series 220S
Material
PVC (polyvinyl chloride)
Product destination
diameter: 40-40 mm tube
Stub stiffness
rigid
Length
23.5 mm
Sustainable offer status
Green Premium product
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure
ENVPEP100802EN
Circularity Profile
N/A

Frequently Asked Questions

hide show

Is there a black version of the 220S20?

Yes, there is.  The 220S20 comes in 3 colors.

For more information, please refer to the link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S20 

What is the part no for 40mm Screw caps

Part no 220S40 available as standard in Grey
Orange can be supplied as special

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S40
User-added image

Can I order the 220/20 in white?

Yes, you can order the 220/20 in white but it needs to be done as a special.
For more information, please refer to the link:https://www.clipsal.com/Trade/Products/ProductDetail?catno=220/20

How do i seal up a 50mm hole in the 230DRAVL?

Using parts 220S50-GY and 260/50-GY. Placethe 260/50 on the inside and the 220S50 on the out side place it in the hole and screw them together. This willl then seal the hole.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=260/50
https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S50
 
 
 

What is the part number for a 20mm steel conduit plug?

The part number  for a 20mm brass plug for steel conduit is 1220S20.

Are the Clipsal Conduit Clips available in Electric Orange?

No, they are only available in grey.

This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

What is the VA rating of a 9001KM transformer light module?

Issue:
What is the VA rating of a 9001KM transformer light module?

Product Line:
Harmony Pushbuttons

Environment:
All Products

Cause:
Product Features

Resolution:
9001 KM2 110-120 volt 25-30 hertz      2.2 VA
9001 KM1 110-120 volt 50-60 hertz      2.4 VA
9001 KM3 208-220 volt 50-60 hertz      2.5 VA
9001 KM4 220-240 volt 25-30 hertz      2.2 VA
9001 KM7 220-240 volt 50-60 hertz      2.0 VA
9001 KM8 277 volt 50-60 hertz             2.4 VA
9001 KM5 380-480 volt 50-60 hertz      2.8 VA
9001 KM6 550-600 volt 50-60 hertz      2.5 VA

Typical 3-line drawings for Sepam Series 20, 40 and 80 current and voltage input connections

Goals and Symptoms

Typical 3-line drawings of Sepam 20/40 Feeder, Sepam 20/40 Main and Sepam 80 Main/Feeder.

Causes and Fixes

See attachment
Sepam.zip



AEDL3
Legacy KB System (APS) Data: RESL203669 V1.0, Originally authored by MiZe on 10/09/2010, Last Edited by MiZe on 10/09/2010
Related ranges: Sepam series 80, Sepam series 40, Sepam series 20

What is the part number of the surface mounting box that has a duct entry?

The part number of the surface mounting box that can accept a duct is 900SPMB. The 900SPMB is a standard pattern Surface Mounting Box for single gang accessories. Internal depth - 33mm.
Features: 4 - 25 x 16mm Trunking Entries, including one each end and side.
Supplied with 3 - Cat. No. 900MBC Clip-in/ push out caps, 4 - Cat. No. 220/10 Insulating Caps and 2 - M3.5 x 0.8 x 16mm long pan head screws. Screws thread into brass inserts.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=900SPMB

 

How does a basic pressure switch work?

Issue:
How does a basic pressure switch work?

Product Line:
Digest 177 Section 22 : Pressure, Vacuum and Float switches

Environment:
North American Products

Cause:
Operation clarification

Resolution:
The switch has a `turn ON` set point and a `turn OFF` set point. ie.a 20-40 switch turns ON at 20psi or below and turns OFF at40psi or above. This range or differential prevents contact chatter in electromechanical devices.

 

When can CCA634 replace a CCA630?

Issue  
Need a new CCA63x but not sure which one I need.

Product Line
SEPAM 20 Series
SEPAM 40 Series
SEPAM 50 Series
SEPAM 80 Series

Resolution
Current transformer are connected to SEPAM series 20,40 and 80 through CCA630 or CCA634 connector.
Both are inclunding interposing CTs.

CCA630:
includes 3 interposing CTs to connect 2 or 3 phases CTs.  
If CSH30 is used CCA630 is needed

CCA634:
includes 4 interposing CTs :
3 to connect 3 phases CTs
1 for the residual current acquisition (CSH30 is now integrated in CCA634 for this function) :
- the sum of the 3 CTs
- an earth/ground CT

A new SEPAM base, adding a connection for Io channel on SubD 9 connector, is needed to accept the CCA634.

THIS NEW FEATURE HAS BEEN IMPLEMENTED STARTING :
series 20 : 1st week of 2003 S/N 0301001
series 40 : week 23 of 2006 S/N 0623001
series 80 : week 29 of 2006 S/N 0629001

As modification is hardware, no firmware update can change the situation for SEPAM made before these dates.

 

ClearSCADA: convert group to instance and retain history

Is there a way to convert a group to an instance of a template and retain the historic data of the points from the group object?

It is possible to do this but it requires a few a few steps.  Here is how historic files work:

When you create an object in the CleraSCADA database (i.e. an analog point) an object ID is created for that point.  With 'historic' enabled on that point a corresponding folder is created in the Database\History\Historic folder.  The folder name is derived from the object ID number of the point divided by 256.  For example, if you have an analog point with an object ID of 22004 then you would see a folder created with the name HdI00085.  This is because 22004 / 256 = 85.95.

Inside folder HdI00085 will be a folder with the name of the object ID (for the example above you would see a folder named 22004).  Inside the 22004 folder will be the historic files which pertain to this point.

In order to retain history for objects in a group (that is converted to a template) you would need to do the following:

1) Note the object IDs for each of the objects in the group you wish to retain history for.  Here I've created an analog point and selected 'view status' from the database tree in order to determine that its object ID is 3882.




2) Open Windows Explorer (File Explorer) and browse to the ClearSCADA\Database\History\Historic folder.  Since the object ID is 3882, the folder we want to look for is 3882 / 256 = 15.164.  Therefore we want folder HdI00015.





3) Once the folder name(s) have been found, locate the sub folders named with the object IDs.  In this case we are looking for a folder named 3882.

Inside this folder will be files named with a .hrd extension.  The name of the file corresponds to the number of weeks that have passed since Jan 1, 1601.  One file per object (point) per week is created to store historic data.




4) Shut down the ClearSCADA server and copy the sub folders (i.e. 003882) to another location.  Shutting down the CS server ensures that the files will not be written to as you are copying them.

5) Convert the group to a template and then create an instance of the template.

6) Locate the corresponding objects (points) in the instance (from the Database tree) and note the object IDs for each of these.

7) Use the method mentioned above to find the folder names where the historic files for the instance objects reside.

8) Once the new folder names have been found, locate the sub folders named with the new object IDs.

9) Rename the saved 'original' folders (from step 4) with the new object ID names (from step 7).  In this example you would rename folder 3882 with the corresponding object ID number from the instance.

10) Shut down the ClearSCADA server and delete the sub folder from step 8).

11) Copy the folders from step 9) into the locations where you deleted the folders in step 10).

12) Restart the ClearSCADA server.  (Note: the ClearSCADA server must be shut down prior to moving the folders (in step 11) as the server requires a restart in order to recognize the newly added historic files).

The instance should now contain the historic values that were previously seen in the original group.

PowerSCADA Expert 8.2 Update 5 - Release Notes

Issue
What is new in PSE8.2 and a detailed listing of resolved problems and minor enhancements.

Product Line
PowerSCADA Expert 8.2 (PSE8.2)

Environment
Installer
 
Cause
A new PSE8.2 cumulative update release.

Resolution
PowerSCADA Expert 8.2 Update 5 - Release Notes
Release Notification (Updated 25 April 2018)

This is a detailed listing of resolved issues and minor enhancements in this release.

 


 

Prerequisite

You must have PowerSCADA 8.2 installed prior to installing this update. No previous updates are required.

Cybersecurity Announcement

Floating License Manager v2.1 addresses vulnerabilities in the Flexera FlexNet Publisher component detailed in CVE-2016-10395, CVE-2017-5571 and CVE-2016-2177. Uninstall the current version of the Floating License Manager, and then install version 2.1.
NOTE: The Floating License Manager v2.1 installer is included with this hotfix release but is not a part of the hotfix installer. Unzip "Floating License Manager v2.1.zip" and run "setup.exe".

Important Notice: There is a known issue with the Floating License Manager v2.1.0.0 installer. When installing with a logged-in Windows User name containing a space, the install will not succeed. The workaround is to install the Floating License Manager with a user that does not include a space character in their name.

Bug Fixes and Enhancements

TFS 21482 - AlarmEvents with a state of normal returned in GetAlarmEvents response for EWS

GetAlarmEvents was changed to not return alarms in the normal state.

TFS 21483 - Incorrect timestamp information provided for AlarmEvents not in the Active state

Alarm timestamps are now updated to reflect the true timestamp of occurrence for all state changes (active, drop out, acknowledge).

TFS 21484 - Unable to filter AlarmEvents by Type using EWS

Alarms are now filtered based on type. 

TFS 21485 - Unable to successfully acknowledge alarms using EWS

In some situations, EWS would not acknowledge alarms correctly.  This behavior has been fixed.

TFS 21486 - Unable to filter alarms using the PriorityTo and PriorityFrom fields

EWS did not observe the priority field correctly. This has been addressed and the minimum allowable priority has been set to 1 (to exclude non-alarm objects in the PowerSCADA alarm database).

TFS 21557 - PowerSCADA projects - including the starter project, PLS_Include, and PLS_Example - need to be upgraded to support the new DBF schemas

PowerSCADA projects have been upgraded to the latest DBF schemas.  If there are existing projects created from the starter project, set [CtEdit] Upgrade = 1 in the Citect.ini file using the Setup Editor, and then restart PowerSCADA Studio.

TFS 21564 - Alarm Proxy does not show the analog alarm states

Alarm Proxy now reports the analog alarm states (HIGH HIGH, HIGH, LOW, LOW LOW) instead of ON / OFF.

TFS 21566 - If a CSV file that does not exist is selected in the I/O Device Manager, the application throws a runtime exception

 

A message is displayed indicating that the file does not exist.

 

TFS 21569 - On large systems with 200k configured alarms, the GetAlarmDefinitions call in Alarm Proxy is slow and causes ENM to timeout

Performance issue in alarm proxy has been resolved.

TFS 21649 - When CoreServiceHost adds and removes devices, it may lose the original IDs

CoreServiceHost now keeps a device chronicle.  When the device is removed and then later added, the ID will remain the same.

TFS 21913 - If the equipment name is changed in the system, but the I/O Device name is unchanged, CoreServiceHost will not refresh the equipment name

CoreServiceHost now properly updates the equipment on name change.

TFS 21935 - Logs that are too large for the Windows Event Log do not get logged properly

Large logs are now broken down into smaller log entries.

TFS 21970 - Profile Wizard and Automation does not support IPv6

Profile Wizard and Automation now supports IPv6 for TCP/IP Board level drivers.  This requires the TCP/IP Driver version 4.0.0.0 or later.

TFS 21975 - Open and Close buttons are disabled at runtime on equipment popup when separate digital tags are used for commands

The form now enables the command buttons if the Pos_On or Pos_Off tags are defined.

TFS 21979 - Alarm Proxy cannot return alarms that transition to inactive

This setting is now configurable in the Application Configuration Utility.

TFS 22043 - Single sign-on calls from a remote thick client do not work

Single sign-on now detects remote clients.

TFS 22060 - The I/O Device Manager cannot bulk import devices with device names greater than 16 characters

The I/O Device Manager now reads the device name length from the equipment.profiles file for proper validation.

TFS 22066 - Wonderware ArchestrA Logger Security Patch

Wonderware ArchestrA Logger Patch 2017.517.2328.1 is applied.

TFS 22150 - Alarm filters do not work on some resolutions

Alarm filter AN numbers are fixed for all alarm page resolutions.

TFS 22155 - Alarm filters perform exact matching

The alarm filter screen allows the user to select the filtering mode. The default setting is read from the INI file [Alarm] FilterMode.  0 (default) = Exact Match, 1 = Starts With, 2 = Ends With, 3 = Contains.

TFS 22306 - The equipment tree used on alarm pages is slow to render over the web client

Any page using the equipment tree should set the default library and symbol on the equipment tree genie, or set 'Hide Symbol Icons' to 'TRUE' if a default icon is not available.

TFS 22401 - Alarm filter and equipment tree filter operate independently

The alarm filter and equipment tree filter operate together to filter the alarm tables.

TFS 22896 - Core service host logs two warnings during shutdown - exception thrown during disposal.

 

Cleanup methods were reworked to prevent the exception.

 

TFS 22898 - EWS cannot obtain tag updates at a 5 second rate

EWS and core services were updated to obtain data at a 5 second poll rate.

TFS 23262 - Equipment popup alarm table does not acknowledge or disable alarms

Alarms can now be acknowledged or disabled in the equipment page.

TFS 23274 - Equipment.profiles cannot be imported into the Profile Editor in cases where the original Device Types and Device Profiles were lost

The Profile Editor can import the equipment.profiles file to generate device types, device profiles, and tags.

TFS 23437 - Citect 2016 Updates

 

Citect 2016 Update (April 10, 2018) is included with this update.

Project ID management was removed from Citect 2016.  Project IDs are now located in the ProjectInfo.xml file. 

MinUnitNumber and MaxUnitNumber (previously stored in UnitNumberRange.xml) have also been migrated to ProjectInfo.xml.

 

TFS 23637 - The Alarm Summary page does not display state information

The Alarm Summary page now displays the state that caused the alarm.

TFS 23650 - 8.2 install does not enable ASP feature within IIS

The installer now enables the ASP feature under IIS. This server role feature is required to run the Citect web control client. (Previously the View-Only web client was the only option for web deployment.)

TFS 24205 - When Core Services receives a timeout from the Client, alarm processing may halt until the service is restarted

Core Services properly recovers from a ctApi deadlock condition.

Files Modified

Applications\AppServices\bin\Framework.dll
Applications\AppServices\bin\Framework.ServiceHost.exe
Applications\AppServices\bin\Modules.CoreServices.dll
Applications\AppServices\bin\PowerLogic.Cipher.dll
Applications\AppServices\bin\Modules.ProviderBase.dll
Applications\AppServices\bin\Modules.ProviderEngine.TestHarness.exe
Applications\AppServices\bin\ObjectFactoryTools.exe
Applications\AppServices\bin\ProviderGatewayProviders.dll
Applications\AppServices\bin\PowerSCADA.Common.dll
Applications\AppServices\bin\Modules.Platform.Citect.dll
Applications\EWS\bin\Framework.dll
Applications\EWS\bin\EWS.dll
Applications\EWS\Web.config
Applications\EWS\DataExchange.svc
bin\de\ProfileEngine.resources.dll
bin\de\ProfileWizard.resources.dll
bin\de\WizardLibrary.resources.dll
bin\es\ProfileEngine.resources.dll
bin\es\ProfileWizard.resources.dll
bin\es\WizardLibrary.resources.dll
bin\fr\ProfileEngine.resources.dll
bin\fr\ProfileWizard.resources.dll
bin\fr\WizardLibrary.resources.dll
bin\it\ProfileEngine.resources.dll
bin\it\ProfileWizard.resources.dll
bin\it\WizardLibrary.resources.dll
bin\ja\ProfileEngine.resources.dll
bin\ja\ProfileWizard.resources.dll
bin\ja\WizardLibrary.resources.dll
bin\ko\ProfileEngine.resources.dll
bin\ko\ProfileWizard.resources.dll
bin\ko\WizardLibrary.resources.dll
bin\ru\ProfileEngine.resources.dll
bin\ru\ProfileWizard.resources.dll
bin\ru\WizardLibrary.resources.dll
bin\zh-chs\ProfileEngine.resources.dll
bin\zh-chs\ProfileWizard.resources.dll
bin\zh-chs\WizardLibrary.resources.dll
bin\zh-cht\ProfileEngine.resources.dll
bin\zh-cht\ProfileWizard.resources.dll
bin\zh-cht\WizardLibrary.resources.dll
bin\ProfileAutomation.dll
bin\ProfileEngine.dll
bin\ProfileWizard.exe
bin\WizardLibrary.dll
bin\ProfileAutomationUtility.exe
bin\CommsMethodProperties.xml
bin\DeviceManagementUserControlLibrary.dll
Applications\Profile Editor\Tags.xml
Applications\Profile Editor\ProfileEditor.Business.dll
Applications\Profile Editor\ProfileEditor.exe
Applications\Profile Editor\ProfileEditor.UserControls.dll
Applications\Profile Editor\Resources\ProfileEditor.UserControls.resources
User\PLS_Include\*
User\PLS_Example\*
Starter\Default_Starter.ctz

Installation

Unzip "PowerSCADA Expert 8.2 Update 5.zip" and run "PowerSCADA Expert 8.2 Update 5.exe".

Where can I get support for APC and MGE Products?

For support on APC and MGE products please visit:  https://www.apc.com/support/

AC Power
Additional Management Cards and Options
Air Cooled Chillers
Air Distribution Accessories
Airflow Management
AIS 3000
AIS 5000
AIS Accessories
AIS Battery Systems
APC CS
APC Enterprise Manager
APC ES
APC RS
Application Shutdown Utilities
Assessment Services
Auto and Air Inverters
AV Accessories
AV Power Conditioners & Battery Backups
AV Power Filters
AV Pro Interconnects
AV Surge Protectors
Backpacks and Messenger Bags
Back-UPS
Back-UPS Accessories
Back-UPS BI
Back-UPS CS
Back-UPS ES
Back-UPS HI
Back-UPS HT
Back-UPS LS
Back-UPS Office
Back-UPS Pro
Back-UPS RS
Back-UPS XS
Basic Rack PDU
Battery Management
Battery Replacement Services
Biometric Security
Bulk Cable
Cabinet Power Distribution
Cable Management
Charge-UPS EX
Commercial/Industrial Surge Suppression
Condensers
Configurable Power Accessories
Configurable Power Distribution
Console Port Servers
CyberFort
Data Center Facility Cooling - Andover Continuum or TAC Vista
Data Center Facility Power - PowerLogic ION Enterprise
Data Center Software Integration Kits
Data Center University
Data Distribution Cable
DC Battery
DC Components
DC Distribution Components
DC600
Desktop KVM
Desktop Notebook Stands
EcoBreeze Air Economizers
Environmental Management System
Environmental Monitoring Unit
Ethernet Switches
Extended Warranties
Fiber Optics
Firmware Upgrades
FLM Series
Fluid Coolers
FRP/Ferroresonant Power Supply
Game Console Surge Protection
Gender Changers
Global Deployment
Hardwire Surge Suppression Accessories
High-Density Cooling Enclosures
IDE Cables
IEEE1394
Industrial
InfraStruxure for Large Data Centers
InfraStruxure for Medium Data Centers
InfraStruxure for Server Rooms
InfraStruxure for Small Data Centers
InfraStruxure for Wiring Closets
InfraStruxure Manager
InfraStruxure Type A
InRoom Direct Expansion
InRow Chilled Water
InRow Direct Expansion
InRow Pumped Refrigerant
Installation Services
Interface Cables
International Plug Adapters
Keyboard
KVM Switches
Laptop Power Adapters
Line-R
Magnum VS
Magnum XS
Magnum XS Rectifier
Maintenance Bypass Panels
Management Platform Integration
Matrix Battery Systems
Matrix-UPS
Matrix-UPS Accessories
Metered Rack PDU
Metered-by-Outlet Rack PDU
MGE Accessories
MGE Alpes
MGE Battery Systems
MGE Comet
MGE EPS
MGE EPS 6000
MGE EPS 7000
MGE EPS 8000
MGE Galaxy
MGE Galaxy 300
MGE Galaxy 3000
MGE Galaxy 3500
MGE Galaxy 4000
MGE Galaxy 5000
MGE Galaxy 5500
MGE Galaxy 6000
MGE Galaxy 7000
MGE Galaxy 9000
MGE Galaxy PW
MGE Legacy
MGE Service Bypass
MGE Sinewave
MGE Static Transfer Switches
MGE UPS 4000
Microsol Estabilizadores
Microsol Modules Isoladores
Mobile Notebook Stands
Modular Components
Modular Power Accessories
Modular Power Distribution
Monitor
Mounting Hardware
Mouse
MRC1800
MRE2400
Multimedia
MWF1700
NetBotz 200
NetBotz 300
NetBotz 400
NetBotz 500
NetBotz Access Control
NetBotz Accessories and Cables
NetBotz Central
NetBotz Rack Access
NetBotz Sensors
NetShelter CX
NetShelter EP Enclosures
NetShelter ES Enclosures
NetShelter Open Frame Rack Accessories
NetShelter SX
NetShelter VL
NetShelter VS Enclosures
NetShelter VX Enclosures
Network Integration Services
Network Patch Cables
NetworkAIR Accessories
NetworkAIR AFX
NetworkAIR CM
NetworkAIR CW
NetworkAIR FM
NetworkAIR IR
NetworkAIR TC
Notebook Security
On Site Service
Open Frame Racks
Operations Capacity
Operations Change
Operations Energy Cost
Operations Energy Efficiency
Operations Insight
Operations Mobile
Operations VIZOR
Outdoor Enclosures
Panelmount Environmental Monitoring
Parallel
Patch Panels
PC1200
Planning Tools and Publications
Portable Cooling
Power Cords
Power Distribution Units
Power Generation Systems
Power Ready Notebook Cases
PowerChute Business Edition
PowerChute Inventory Manager
PowerChute Network Shutdown
PowerChute Personal Edition
PowerChute plus
PowerManager
PowerShield
Preventive Maintenance
Project Management Services
ProtectNet
Rack Air Distribution
Rack Components
Rack LCD Consoles
Rack PDU Accessories
Rack-mount Transfer Switches
Refrigerant Distribution
Remote Monitoring Services
Replacement Batteries
Replacement Notebook Batteries
Residential Hardwire Surge Suppression
Retail
Retractable Cables
Room Air Distribution
Room Cooling Accessories
Router Cables
Row Cooling Accessories
SCSI
Security Cameras
Sensors
Serial
Service Bypass Panel
Service Plans
Silcon
Silcon Accessories
Silcon Battery Systems
SLM/FLM Series
SmartSlot Expansion Chassis
Smart-UPS
Smart-UPS Accessories
Smart-UPS Battery Systems
Smart-UPS DP
Smart-UPS On-Line
Smart-UPS RT
Smart-UPS VT
Software Configuration
Software Education
Software for NetBotz Appliances
Software Installation
Software Integration
Spare Part Kits
Specialty Enclosures
Start-Up Service
Stationary Power Distribution Units
Step-Down Transformer
StruxureWare Central
StruxureWare Operations Suite
SurgeArrest Essential
SurgeArrest Home/Office
SurgeArrest Notebook
SurgeArrest Performance
Switch Boxes
Switched Rack PDU
Symmetra
Symmetra Accessories
Symmetra Battery Systems
Symmetra MW
Symmetra MW Accessories
Symmetra Power Module
Symmetra PX
Symmetra PX Accessories
Sync and Charge Cables
Thermal Containment
Thick and Thin Ethernet
Token Ring
Toploading Cases
Traditional Cases
Training Services
Transceivers
Transportation
Travel Mice
TSP Accessories
TSP Battery
TSP/Generator
TSP/Total System Power
Tune-UPS for Symmetra
Uniflair Chilled Water
Universal Mobile Device Batteries
Universal Notebook Batteries
Universal Notebook Power Adapter
Universal Power Accessories
Universal Power Adapters
UPS Network Hub Card
UPS Network Management Cards
USB Adapters & Converters
USB Cables
USB Charging Cables
USB Hubs
Wall-mount Transfer Switches
Wheeled Cases
Wireless
Wizards and Configurators
WS200