pin clip br size 4-57mm pk200

PIN CLIP BR SIZE 4-57MM PK200

Catalogue Number: 564PC4
pin clip br size 4-57mm pk200
Colour:
Colour: Per UOM Std.
  • 1 PCE 1

Specifications

hide show
Product brand
Clipsal
Material
brass
Length
57 mm
Sustainable offer status
Green Premium product
REACh Regulation
Free of Substances of Very High Concern above the threshold
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure
ENVPEP060307EN
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Installation Instruction

  • Specifications

Frequently Asked Questions

hide show

Does the 554C4 have new 4 single screw connectors instead of the original two screw connectors?

Over the coming months, the terminal connectors supplied with a number of Electrical Accessories will be changing. These changes are:
 
  1. The screw type in the connector will suit either a No. 2 Philips Drive or a No 1 Square Drive screwdriver.
 
  1. Terminal connectors will now be square wrapper design, ensuring reliable connection.
 
  1. All connectors will now be supplied with single screw. This is fully compliant with AS/NZS3000:2007 as per clause (d) below from sub-section 2.9.4. for active, neutral and earth connections.
(d) a neutral conductor used as a combined protective earthing and neutral (PEN) conductor for protective earthing of any portion of an electrical installation, the terminal shall be of a type having—
  1. two screws; or
  2. one screw with an outside diameter not less than 80% of the tunnel diameter.
 
The terminal connectors being supplied have a screw diameter in excess of 80% of the tunnel diameter which means the single screw connectors can be used for active, neutral and earth connections.
 
The products supplied with new connectors are:
  • 504/4
  • 554/3
  • 554/4
  • 554J4
  • 554C4
  • 554J4B100
  • HD554J4

ClearSCADA: Adding a metadata field to provide a Description to database objects

In ClearSCADA, it is possible to add a custom 'Description' field to object properties by adding a custom metadata field.  The description field could then be queried. This article describes the steps to configuring such a metadata field.

1) In ViewX, right-click on the root group and, from the menu bar, select 'Edit Metadata'





2) In the Metadata dialog select the 'Fields' tab, click the 'Add' button and then select 'Standard'







3) Set up the new field as follows and then click OK:








4) Back in the Metadata dialog select the 'Labels' tab and click the 'Add' button.



5) Configure the label as follows and then click OK:








6) Now if you create a point and look at the 'Identification' tab you will see a new field which you can populate with a text string.







7) If you perform a query from the CDBObject table and include the ptDesc field you will see the text string that you defined for the point.





The steps above may be used as a guide for configuring other custom metadata fields.


Note: You can specify the CDBPoint table instead of the CDBObject table (steps 3 and 5 above) if you want to limit the description field to points only.  If this is done then the 'Description' field will then appear on the tab labeled 'Point' in the point properties dialog.