C-Bus SpaceLogic Relay voltage free 4 channel, DIN rail mounted, selectable inbuilt C-Bus power supply
Item Number: 5504RVF
Specifications
Design
| Range of product | SpaceLogic C-Bus |
|---|---|
| Product brand | Schneider Electric |
| Range | C-Bus |
| Product or component type | relay |
| Device application | switching loads |
Physical
| Rated voltage |
|
|---|---|
| Local signalling | multi-colour LED |
| Connector type | 2 x RJ45 in parallel |
| Load type |
|
| [ie] rated operational current | 20 mA at 20...36 V |
| Inrush current |
|
| Number of channels | 4 |
| Width | 144 mm |
| Height | 92 mm |
| Depth | 63 mm |
| Connections - terminals | screw terminal block |
| Connections - terminals | RJ45 connector |
| Device mounting | DIN rail |
| Net weight | 361 g |
| Ip degree of protection | IP20 |
| Device presentation | complete device |
| Ambient air temperature for operation | -5...55 °C |
| Relative humidity | 10...93 % |
| Product certifications |
|
| Standards |
|
| Reach free of svhc | Yes |
| Mercury free | Yes |
| Rohs exemption information | Yes |
| Environmental disclosure | ENVPEP2408008EN |
| Reach regulation | Free of Substances of Very High Concern above the threshold |
| China rohs regulation | Product out of China RoHS scope |
| Eu rohs directive | Compliant By Exemption |
Documents & downloads
-
All
-
Product Brochures
-
Environmental Disclosure
-
End of Life Manual
-
Installation Instruction
-
Operating Manuals
-
Quick Start Guide
-
Declaration of Conformity
-
Certificates (MSDS)
-
Declaration of Conformity (Sustainability)
-
Software - Release
Frequently Asked Questions
How to enable the C-Bus Clock or Power Supply of the Digital Dimmers?
Hide ShowFor any Voltage Free Relay, the C-Bus Clock can be enabled or disabled via the front panel, by pressing and holding down the top left channel button, and short pressing the top channel button second in from the right.
For any Voltage Free Relay, the C-Bus Power Supply can enabled or disabled via the front panel, by pressing and holding down the top left channel button, and short pressing the top right channel button.
Note: By default both the C-Bus Clock and C-Bus Supply are disabled.
New C-Bus relays 55xxRVFs now have a minimum load rating?
Hide ShowThe minimum load refers to the minimum voltage/current required to maintain the quality of the relay contacts.
The relays are the same as used in the current C-Bus relays so there is no difference in product spec. The datasheet wanted to provide more information to the customer.
How to enable/disable C-Bus power supply for 5516RVF
Hide ShowThe integrated C-Bus Power Supply can be enabled or disabled via the front panel by performing a short press on the top right channel button whilst holding down the top left channel button to toggle the enabled state.
By default, the integrated 200 mA C-Bus Power supply is disabled.
The enabled status of the integrated C-Bus power supply is shown on the Unit indicator.
(Green - Enable, Yellow - Disable).
For 5508RVF and 5504RVF