Standard Series, Socket Outlet Mechanism, Automatic, Single, 250VAC, 10A, Panel Mount

Standard Series, Automatic Single Socket Outlet Mechanism, 250VAC, 10A, Panel Mount WE

Item Number: 10MP-WE



Qty UoM EAN Colour



Range of product

Standard Series

Product or component type


Product brand



Quantity per set

set of 1


without marking

Local signalling

without light indicator

Device mounting


Fixing mode

by screws

[in] rated current

10 A

[ue] rated operational voltage

250 V AC


33 mm


43 mm


42 mm

Fixing center

84 mm

Number of poles



AS/NZS 3100|AS/NZS 3112|AS/NZS 3133:approval number S/1

Reach regulation

Reference contains Substances of Very High Concern above the threshold

Eu rohs directive

Compliant with Exemptions

China rohs regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental disclosure


Circularity profile



Package 1 bare product quantity


Cover type

complete housing

Socket additional information

with hinged lid

Unit type of package 1


Number of units in package 1


Package 1 height

3.4 cm

Package 1 width

4.3 cm

Package 1 length

4.3 cm

Package 1 weight

47.1 g
Show all specifications

Frequently Asked Questions

hide show

What are the different residual current device categories?

IEC 60755 describes general requirements for residual current operated protective devices.

Vigi modules (Vigi NG125, see example in the figure)
The add-on Vigi module is the most flexible residual current device (it is installed in combination with a circuit breaker).
Vigi are covered by the IEC 61009 and IEC 62423 series of standards.

Residual Current operated Circuit Breakers without integral overcurrent protection (RCCB) (Acti9 iID, see example in the figure)
The Acti 9 iID RCCB is the main residual current device in the facility and is used as the main incomer. RCCB are covered by the IEC 61008 and IEC 62423 series of standards.

Residual Current operated circuit Breakers with integral Overcurrent protection (RCBO) (Acti 9 iCV40N, see example in the figure)
RCBO = combination of circuit breaker and residual current device function in the same product. This can be obtained by combining the circuit breaker with its Add-on Vigi Module.
RCBO are covered by the IEC 61009 and IEC 62423 series of standards.

Socket RCD (SRCD) (see example in the figure) SRCD are covered by the IEC 62640 series of standards.

❺ Industrial type circuit breakers incorporating the RCD function must comply with Annex B of IEC 60947-2.
Residual current devices with a separate toroid are standardized in Annex M of IEC 60947-2.

Reference document - CA908066E

Can I install a rectangular sensor upstream from a circuit-breaker.?

Yes, a rectangular sensor can be installed upstream or downstream of a circuit breaker.